Aqua Medic LEDspot 1000 W flex Mode D'emploi page 4

Operation manual ENG
In purchasing this LEDspot, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts. High quality components and latest technology as well as modern design
guarantee for enjoying your aquarium lighting for many years.
1. Technical Data
Line voltage: 100 - 240 Volt, 50/60 Hz (if not stated otherwise on the ID-label).
Lamps: according to the customer's request.
The LEDspot 1000 W flex is equipped with a 2-colour LED chip. Both channels can be dimmed separately. Light
colours can be dimmed separately. The Meanwell ballast ensures a constant and safe power supply. The pre-
assembled reflector has a beam angle of about 45°. Optional, the reflector supplied incl. diffuser can be mounted
with an angle of about 60°. Both light channels can be adjusted optimal to the individual needs by an optional
manual dimming (incl. approx. 7.50 m cable).
A holder for the ceiling is included. Dimensions Ø 450 mm, height approx. 610 mm.
2. Unpacking
On unpacking, please check the light immediately for any damages. In case of any complaints, please contact your
dealer directly.
Included in shipment:
 LEDspot with holder and central loop for hanging up with chain
4