SW-Motech FBL.01.070.20000 Instructions De Montage page 25

8
Mount the pressure rod with the safety pin (11).
Screw the footpeg bracket to the vehicle using the original parts (Orig.).
 WARNING: Use liquid screw lock!
Tighten the original screw (Orig.) according to the manufacturer's
instructions.
Adjust the pedal (7) according to your driving habits.
Then tighten the screw (8) as specified in the instructions.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
11
1
11
×
Errors and omissions excepted
Subject to technical and design changes.