DeWalt DCD100 Traduction De La Notice D'instructions Originale page 29

Batteries
Cat # V
DC
DCB546 18/54 6.0/2.0
DCB547/G 18/54 9.0/3.0
DCB548 18/54 12.0/4.0
DCB549 18/54 15.0/5.0
DCB181 18
DCB182 18
DCB183/B/G 18
DCB184/B/G 18
DCB185 18
DCB187 18
DCB189 18
DCBP034/G 18
DCBP518/G 18
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
SL1 4DX
England
15.09.2023
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Weight (kg) DCB104
Ah
1.08 60
1.46 75*
1.46 120
2.12 125
1.5 0.35 22
4.0 0.61 60/40**
2.0 0.40 30
5.0 0.62 75/50**
1.3 0.35 22
3.0 0.54 45
4.0 0.54 60
1.7 0.32 27
5.0 0.75 50
WALT at the following
e
WALT.
e
Chargers/Charge Times (Minutes)***
DCB112/ DCB115/
DCB107 DCB113
DCB1102 DCB1104
270 170 140
420 270 220
540 350 300
730 450 380
70 45 35
185 120 100
90 60 50
240 150 120
60 40 30
140 90 70
185 120 100
82 50 40
240 150 120

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
DCB116 DCB117 DCB118 DCB132 DCB119
90 80 40
135* 110* 60
180 150 80
230 170 90
22 22 22
60 60/45** 60/40** 60/40**
30 30 30
75 75/60** 75/50** 75/50**
22 22 22
45 45 45
60 60 60
27 27 27
75 60 50
FOR FUTURE REFERENCE
EnGLIsH
60 90 X
75* 135* X
120 180 X
125 230 X
22 22 45
60 120
30 30 60
75 150
22 22 40
45 45 90
60 60 120
27 27 50
50 75 150
27