Publicité
Les langues disponibles
Les langues disponibles
more uniform as colour pigments burn in during the heat-activated curing process."
Insert only if
applicable ---->
9.7
log placement
WARNING
!
Log Number
1
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
2
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
3
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
4
5
PHAZER™ log and glowing embers, exclusive to Continental, provide a unique and realistic glowing effect that is differ-
ent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
6
may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments burn in during
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
7
the heat-activated curing process.
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
8
more uniform as colour pigments burn in during the heat-activated curing process."
9
Insert only if
10
applicable ---->
Log Number
1
2
3
4
Stud
5
(Log #1)
6
7
8
9
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
10
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Studs
(Log #2)
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
A1
note:
Log numbers are located on the bottom or back of the logs.
Part Number
If applicable, insert the following statement:
note:
Log numbers are located on the bottom or back of the logs.
Part Number
Burner
Ports
A1
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
B2
B1
Floor of
Firebox
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
Burner Overview
1
A2
Description
Description
Pilot
Shield
C2
2
B1
finishing
Stud
(Log #1)
A2
C1
Studs
(Log #3)
1
W415-3096 / C / 05.03.22
B2
EN
51
Publicité
