Haier HD80-A3939E-S Manuel De L'utilisateur page 70

To clean the lint filters
1. Extract the two filters A and B in
sequence pulling them upwards, as
shown in the figure.
2. Open the filters.
3. Gently remove lints from both filters using
your fingertips or a soft brush, a cloth or
under water running.
4. Close both filters by repositioning them
inside the door, making sure they are
positioned correctly in place.
WARNING
Before reinserting the filters, make
sure there is no lint residue inside the
compartment; if not, remove it with a
vacuum cleaner.
WARNING
Clean the lint filters before every cycle.
70