Safety Devices; Functions; Use - MAXXMEE QSF78 Mode D'emploi

EMS Belt
(preferably via a USB mains adapter to
the plug socket).
The charging process begins and the
charge control lamp on the operating
element lights up red.
2. As soon as the charge control lamp
goes out, the battery is charged.
Disconnect the USB cable from the
power source and then from the USB
socket.

SAFETY DEVICES

The operating element (3) has two built-in
safety functions:
• The operating element automatically
switches off after 10 seconds if no
contact is established between the
skin and silicone pad in the belt.
• The operating element automatically
switches off after 20 minutes of use.

FUNCTIONS

EMS stands for electrical muscle stimula-
tion. The device is used to stimulate the
abdominal muscles.
Beginners should use the device for no
more than 15 minutes a day to prevent
overstimulation!
Advanced users can use the device for
up to 30 minutes a day. We recommend
no more than 2 units per day, with a rest
phase of at least 4 hours between the
units.
Modes
M1 – Warm-up and cool down
M2 – Intensive training, high level
M3 – Intensive training, medium level
M4 – Advanced training, medium level
M5 – Advanced training, high level
M6 – Complete training, high level
Each mode has 9 different intensity levels.

USE

Please Note!
■
Do not use straight after eating.
■
The device should not be used before
going to sleep. Massages have a
stimulating effect, which may lead to
problems getting to sleep.
■
For reasons of hygiene, the device
should only be used by one person
and cleaned after each use (see the
"Cleaning and Storage" chapter).
Keep the device clean.
■
The skin may feel warm during the
treatment. This is normal and not a
cause for concern.
■
Do not bend the silicone pads.
■
The silicone pads must not come into
contact during use with metal parts,
e.g. on belts, wrist watches, jewellery
or similar items.
■
We explicitly point out that with some
people skin irritations or hypersensi-
tivity may occur as a result of the elec-
trical muscle stimulation. In this case,
stop using the device immediately
and consult a doctor if necessary.
1. Thoroughly clean and then dry the
area which is to be trained.
2. Place the belt around you so that the
silicone pads in the belt rest directly
on the skin over the abdominal mus-
cles. Fix the belt using the hook-and-
loop fastener (Picture B).
3. Attach the operating element (3) to
the belt using the press studs (Picture
C). Both press studs must fi t securely
for the device to work.
The belt is suitable for a waist
circumference of 65 – 110 cm. This
circumference can be extended
up to 140 cm with the extension
strap (5).
EN
13