Operation; Applications - Echo CCS-58V Manuel D'utilisation

ASSEMBLY
WARNING
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condi-
tion leading to possible serious personal injury.
WARNING
To prevent accidental starting that could cause
serious personal injury, always remove the bat-
tery pack from the product when assembling
parts.

OPERATION

DANGER
Never cut near power lines, electric cords, or
other electric sources. If bar and chain jams
on any electrical cord or line, DO NOT TOUCH
THE BAR OR CHAIN! THEY CAN BECOME
ELECTRICALLY LIVE AND VERY DANGEROUS.
Continue to hold the chain saw by the insulated
rear handle or lay it down and away from you
in a safe manner. Disconnect the electrical
service to the damaged line or cord before at-
tempting to free the bar and chain from the line
or cord. Contact with the bar, chain, other con-
ductive parts of the chain saw, or live electric
cords or lines will result in death by electrocu-
tion, electric shock, or serious personal injury.
WARNING
Do not allow familiarity with this product to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict seri-
ous injury.
WARNING
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 as well as
head and hearing protection when operating
this equipment. Failure to do so could result in
objects being thrown into your eyes and other
possible serious injuries.
14
Mounting the Tip Guard
See Figures 26 - 27.
 Stop the motor and remove the battery.
 Mount the tip guard on the bar nose.
 Fit the locking tab in the recessed slot in the
guide bar.
 Tighten the mounting screw with wrench until
snug.
 From the snug position, tighten the mounting
screw an additional 3/4 of a turn using a wrench.
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accesso-
ries not recommended can result in serious
personal injury.
Never fell a tree or cut a log or limb that has a
diameter greater that the length of the guide
bar. Only properly trained professionals should
perform these cuts. Performing these types of
cuts can cause an accident and result in death
or serious personal injury.
Before each use, inspect the entire product for
damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners
and caps and do not operate this product until all
missing or damaged parts are replaced. Please call
1-877-396-3036 or contact an authorized service
center for assistance.

Applications

You may use this product for the following purposes:
 Limbing and pruning branches from trees
 Felling small trees
 Bucking the fallen tree into shorter lengths
This product will accept ECHO 58 V lithium-ion
battery packs.
English
WARNING
WARNING