Publicité
Les langues disponibles
Les langues disponibles
Automatic mode
Turn the knob to AUTO.
Time
Measured
temperature
Absence
mode
Comfort or economy manual mode
(up to program change)
When starting up, the set-point temperature is displayed.
i
Press the
button to display the temperature measured
by the thermostat (the symbol
the °C).
• The temperature display can be reversed (CF02 start
up menu):
- automatic mode : measured temperature
i
- press
: set-point temperature
• If you do not want to use a program, you can go to
continuous Economy mode (knob turned to
continuous Comfort mode (
Protection mode (
).
Current setting
(e.g. comfort)
Day
Request for
heat or cold
Selection of the Heat/Cold
mode (press for 3 seconds)
is displayed above
),
) or continuous Frost
- 34 -
Absence mode
This mode is used to set a tempe-
rature (5 to 15°C) for a period that
can be set from 1 to 365 days.
From the automatic mode (AUTO),
press the
button.
The number of days flash on and
off.
Press + or - to set the number of
days.
Example: leaving on 10 January,
returning on 19 January, indicate 9
days.
Automatic operation will restart on
19 January at 00.00 h.
Press OK to confirm.
The temperature flashes on and off.
Press + or - to set the temperature.
Press OK to confirm.
To cancel the absence mode (e.g. when returning
early), press the C button or turn the knob.
In COOL mode, the absence mode shuts down the
heat pump. No set-point setting possible.
The screen displays "- - - -".
- 35 -
Publicité
