Télécharger Imprimer la page

Elesta RTU 300B Mode D'emploi page 13

Publicité

Les langues disponibles

Les langues disponibles

Mountings
Lift off the cover by using
a screwdriver.
Use the screwdriver to remove
the batteries supplied from the
unit (wall mounted) or remove
the battery cover (fitted on base).
Wall mounting
Secure the thermostat using the screws
and pegs or fit onto a flush-mounted box
(➊, distance between
centres 60 mm).
Fit the batteries back,
ensuring that they are
Fitted on base
Using the support provided, you can
place the transmitter on an item of
2
furniture (see § Location).
3
correctly fitted.
- 24 -
Starting up
Turn the knob to Shutdown and
press the right-hand button for
5 seconds until C201 x:xx is
displayed (maintenance menu
reserved for the installer).
Press OK.
The screen displays CF01.
Quick access to the radio menus (association, test):
turn the button to Shutdown and press the 2nd button (star-
ting from the left) for 5 seconds until CF08 is displayed.
CF01 - Correction of room temperature
measurement
AUTO
If there is a difference between
PRO
PROG
the temperature noted (thermo-
meter) and the temperature
measured and displayed by
the unit, the menu acts on the
measurement of the probe so as
to compensate for this difference (from -4°C to +4°C in
steps of 0.1°C).
Press + or - to make your choice, OK to confirm it and
go to the next menu.
5 sec.
- 25 -

Publicité

loading