Elesta RTU 300B Mode D'emploi page 14

CF02 - AUTO mode
temperature display option
Temperature displayed
Press + or - to make your choice, OK to confirm it and
go to the next menu.
CF03 - Control hysteresis
Adjustable from 0.2°C to 2°C by
increments of 0.1°C
The shift is symmetrical.
Example: Setting = 0.4°C.
Shift = -0.2°C/+0.2°C.
Press + or - to make your choice, OK to confirm it and
go to the next menu.
Continuous room temperature
display
Continuous display of the set-point
- 26 -
CF04 - ECO operation in
COOL mode
ECO operation in
COOL mode
Press + or - to make your choice, OK to confirm it and
go to the next menu.
CF05 - Selection of the
opening direction of the
change-over relay
Opening direction of the
change-over relay
Press + or - to make your choice, OK to confirm it and
go to the next menu.
Shutdown
Control by the thermostat
Closed in HEAT mode
Open in HEAT mode
- 27 -