Publicité
Les langues disponibles
Les langues disponibles
Ice pack
Fig. 7/B
If a power failure or malfunction occurs,
the ice packs can be used to slow down
the thawing process. The longest
storage time is obtained by placing the
ice pack on the food in the top
compartment.
To save space, the ice pack can be
stored in the door compartment.
The ice packs can also be used to cool
food temporarily, e.g. in a cold bag.
Ice maker
Fig. 8
Use only drinking water to make ice
cubes.
1. Take out water container and fill with
drinking water up to the mark.
Note
If too much drinking water is added,
the function of the ice maker may be
impaired. The ice cubes cannot be
removed individually from the ice tray.
Too much drinking water was added
and is running into the storage
container, causing any ice cubes
to freeze together.
2. Pour drinking water into the filler
opening.
3. Re-insert water container.
4. When the ice cubes are frozen, press
lever down and release.
The ice cubes loosen and fall into
the storage container.
5. Pull out storage container and remove
ice cubes.
Ice cube tray
Fig. 9
1. Fill the ice cube tray ¾ full of drinking
water and place in the freezer
compartment.
2. If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
3. To loosen the ice cubes, twist the ice
tray slightly or hold briefly under
flowing water.
Switching off and
disconnecting the
appliance
Switching off the appliance
Fig. 2
Press the On/Off button 1.
Temperature display goes out,
refrigerating unit switches off.
Disconnecting the appliance
If you do not use the appliance for a
prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.
en
31
Publicité
