en
Switching
the appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. The
temperature display 2 flashes.
Press the temperature selection
button 4. The warning signal switches
off.
When the freezer compartment has
reached the set temperature,
the temperature display 2 is lit.
Operating tips
After the appliance has been switched
■
on, it may take several hours until the
set temperature has been reached.
Do not put any food in the appliance
beforehand.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
26
Setting
the temperature
Fig. 2
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 2.
We recommend a factory setting
of -18 °C in the freezer compartment.
Alarm function
In the following cases an alarm may be
actuated.
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than one minute. Close the
door to switch off the warning signal.