Honeywell QUIETSET HY-254 Serie Guide D'utilisation page 6

HY-254 SERIES REMOTE CONTROL OPERATION
On/Off
Press the Power button ( ) once to turn the fan on. Press the
Power button a second time to turn the fan off.
Speed Control
The fan will automatically start on "Sleep" speed when initially
turned on. To adjust the speed up or down, press the Fan
Speed button ( ) repeatedly to increase level
Oscillation
To activate the Oscillation feature, press the Oscillation button
( ) once.
Press the Oscillation button again to turn the Oscillation
feature off.
Remote Control Storage
When it is not in use, the remote control may be stored in the
recessed area located behind the controls (Fig. 10).
HY-280 SERIES FAN OPERATION
On/Off
To turn fan on, press the Power button ( )
located on the left side of the control panel.
Current room temperature will be displayed
whenever fan is on.
Speed Control
The fan will automatically start on "Sleep" speed
when initially turned on. To adjust
the speed up or down, press the Fan Speed
button ( ) repeatedly to increase level.
Oscillation
To activate the Oscillation feature, press the
Oscillation button ( ) once.
Press the Oscillation button again to turn the
Oscillation feature off.
Timer
Choose from 1, 2, 4, or 8 hour settings by performing the following function:
• 1 hour: Press the Timer button ( ) once.
• 2 hours: Press the Timer button twice.
• 4 hours: Press the Timer button a third time.
• 8 hours: Press the Timer button a fourth time.
Press the Timer button a fifth time to turn the Timer feature off.
Fig. 10
Model HY-280
®
5