Honeywell HY-022 Serie Guide D'utilisation

HY-022-026-030_OM.qxd 10/13/06 2:07 PM
Owner's Manual
HY-022 Series HY-026 Series HY-030 Series
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Use this fan only as described in this manual.
Other use not recommended as it may cause fire,
electric shock or injury to persons.
2. This product is intended for household use ONLY
and not for commercial, industrial or outdoor use.
3. To protect against electric shock, do not place
fan in window, immerse unit, plug or cord in
water or spray with liquids.
4. This appliance has a polarized plug(one blade is
wider than the other). To reduce the risk of shock,
this plug is intended to fit only one way in a
polarized outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
Page 1
I O
NTERNAL SCILLATING
T F
OWER ANS
HY-022 Series
HY-026 Series
HY-030 Series
6. Turn the fan OFF and unplug the fan from the
outlet when not in use, when moving the fan from
one location to another and before cleaning.
7. To disconnect the fan, first turn the unit OFF, grip
the plug and pull it from the wall outlet. Never
pull the plug by the cord.
8. Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open
flame, cooking or other heating appliance.
10. Do not operate the fan with a damaged cord or
plug or if the product malfunctions, is dropped or
damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the
manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall or ceiling.
15. Do not operate fan on tabletop or desktop.
16. Do not operate if the fan housing is damaged.
17. A loose fit between the AC outlet(receptacle) and
plug may cause over heating and a distortion of
the plug. Contact a qualified electrician to replace
loose or worn outlet.