Intenso PD10000 Mode D'emploi page 14

USE
Device overview
1 - Status LCD
2 - Funktion key (ON/OFF)
3 - USB-C In/Out (PD)
4 - microUSB In
5 - USB-A Out (QC)
Operation
1. Function key (ON/OFF)
If the charging process dos not start automatically, you can start it manually by briefly pressing the
function key. You can stop the charging process and deactivate the Powerbank by briefly pressing
the key twice.
2. LCD display
The current charging status is displayed numerically on the LCD display during charging, resp.
discharging the Powerbank as well as through brief pressing of the function key.
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
You can charge the Powerbank via the supplied USB-C to USB-C cable or via the microUSB port
(microUSB In). Connect the selected cable depending on the type with the USB-C port (USB-C In/
Out PD) or the microUSB port (microUSB In) of the Powerbank and your USB power supply or
computer.
Always use only one of the two charging options, the USB-C port (USB-C In/Out PD) or the
microUSB port (microUSB In)!
While the Powerbank is being charged, it is not possible to charge another device via the Power-
bank.
The required charging time for the Powerbank depends on the selected charging source and its
output power.
Normal charging:
Use a standard USB power supply or USB port of a computer to charge the Powerbank via the
microUSB In port (max. 5V/2.1A = max. 10.5 Watt) or USB-C In/Out PD port (max. 5V/3A = max.
15 Watt).
1
2
EN - Page 3 of 8
3 4 5