KERN BIC 1T-4 Notice D'utilisation page 36

Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum load is indicated by the display of „LLLLLL", and a signal
sound. Unload weighing system or reduce preload.
7.5 Weighing with tare
Place an empty weighing container, the weight of the
weighing container will be displayed.
Press , the zero display appears. The indicator [NET]
is displayed. The tare weight is saved until it is deleted.
Weigh the material, the net weight will be indicated.
The taring process can be repeated any number of
times, e.g. when adding several components for a
mixture (adding). The limit is reached when the whole
weighing range is exhausted.
After removing the weighing container, the weight of
the weighing container appears as negative display.
The tare weight is saved until it is deleted.
Delete tare value:
Unload the balance and press
appear.
14
, zero display will
BIC-BA-e-1610