Temporary Function Interruption; Saving Energy Advices; Troubleshooting - Inomak UBD2000 Manuel D'installation, D'utilisation Et D'entretien

10 Temporary function interruption

In case you wish to turn the appliance off for a while, in order to keep it in the best possible condition,
follow the instructions below:
Turn the appliance off and disconnect from the electrical supply. Empty the appliance and clean it as
indicated above. Keep the doors open in order to avoid unpleasant odors.

Saving energy advices

11
Open the appliance's doors according to your needs but please do not do that pointlessly. They must
remain open the less possible there can be.
Check regularly that the appliance's doors are solidly closed and that the door seals are in good
condition.
Do not place your appliance near heat sources or points with high sun radiation.
Do not fill at once your appliance with big quantities of products, because this will increase energy
consumption.

12 Troubleshooting

Malfunction
The appliance does not cool
Ice in the evaporator
Water in the appliance
gastronorm
Water in the
pans
(open top refr.)
In case of malfunction, contact the dealer of our company describing the problem, denoting the model and
the serial number (S/N) of your appliance.
All the technical characteristics necessary are specified on the identification tag positioned in side wall
insight the right door of the device.
Possible cause
There is ice in the evaporator
obstructing
The products are
the air flow
The room temperature is very
high
The temperature adjustment is
very low (refrigerators)
High humidity environment
Humid products have been
placed in the refrigerator (ex.
Vegetables)
The doors are opened frequently
and for a long time
The drainage pipe has been
sealed
High humidity environment
Solution
(See case 2)
Remove the products which obstruct the
air flow of the evaporator
Improve the temperature condition of the
room
Check the temperature adjustment.
Increase the temperature setting.
Improve the environment condition.
Increase the defrost frequency.
Cover the food with a plastic film before
putting it in the refrigerator
defrost frequency and duration.
Decrease the open door duration as
possible. Increase the defrost frequency.
Clean the drainage pipe
Increase the setting temperature
6
.
Increase the