Honeywell Home Round TH8732WF Guide D'installation Professionnelle page 13

5
Enter the password by pressing
or t to select the first digit and
press OK. Continue for all four
digits.
7
Press s or t to highlight the setting and
press OK. Continue until all settings have
been configured. For a full list of setup
options, see "Setup options" on page
14.
Note: To exit setup early, press t to
highlight EXIT and press OK.
6
Highlight Set Up and
press OK.
8
When all settings are configured,
save changes.
To save and confirm, highlight
Yes and press OK. To exit without
saving, press t to highlight No
and press OK.
13