Honeywell Home Round TH8732WF Guide D'installation Professionnelle page 6

4
Connect all wires
Push each wire into its corresponding
terminal until it is firmly in place. Gently
tug on wires to verify they are secure. If
you misplace a wire, use a ballpoint pen to
push down on the terminals and release
the wire.
Refer to page 8 for wiring options,
configurations, and notes.
Note: The illustration to the right
shows the most common wiring
configuration.*
5
Mount the wall plate using
the provided screws
* The TH8732WFH5004 requires a common wire, does not use a battery and does not have the level pictured.
6
AAA
*
AAA
*