Haier DW15-PFE1 Mode D'emploi page 24

When the programme indicators " C1,C3,C4" blink.
Have you checked whether:
the drain hose is crimped or bent.
the drain hose is too high.
When the programme indicators " C1,C4" blink.
Have you checked whether:
the drain hose is too low.
If you have made all these checks and the dishwasher still does not function or your
dishwasher has another error display. You can try to fix the problem by turning the
power to the dishwasher off, waiting a few minutes and then switching the power back
on. if the dishwasher still does not function and/or the problem persists, contact the
nearest authorised service center and provide them with the following information:
the nature of the problem.
the model type number (Mod...) And the serial number (S/N...), which are indicated on the plate
located on the side of the inner part of the door.
Lower spray arm rotates with difficulty
Spray arm is blocked by small items or food remains.
Lid in detergent compartment cannot be closed
Detergent compartment has been overfilled.
Mechanism is clogged with remnants of detergent.
Indicator lamps do not extinguish after washing has finished
Main switch is still set to ON.
Remnants of detergent stuck inside dispenser
Compartment was damp when it was filled up with detergent. Compartment must be dry before
detergent is added.
23
en
C3
C4
C1
C4
C1