LSL 150H072 Fiche De Montage page 3

Fitting instruction Tour-Match-Kit
Model: Honda CBR 900RR
Type: SC33
Important: If you are not a trained motorcycle mechanic stop now. Ask a local
motorcycle shop to do the work for you.
instructions.
Length of brake-lines:
Throttle cable: as original
Clutch cable: as underneath mentioned!
Chokezug: as original
The fairing and screen remain unmodified!
Instructions:
The original stanchion clamping screws must be replaced by the ULS-screws M8x40.
The routing of throttle and choke cable remain as original. Routing of the clutch-cable is as
follows:
Lead the clutch cable in front of the stanchion between the both upper radiator brackets
and above the bottom yoke down to the engine.
The steering angle has to be reduced by the attached aluminium-spots (t:2mm). Use
suitable glue for fixing.
Replace the brake hose system against the new stainless steel brake hoses. Follow the
separate fitting instructions.
Please read the LSL-Match-Kit Fitting
65 + 68cm (BK10.1)
Part. no.: 150H072
Year: 1996 - 1997
REV 01 29.03.21