Publicité
Les langues disponibles
Les langues disponibles
who should ensure that the cord is suitable for the power rating of the
appliance (10A). Check that other appliances with high absorption are
not connected to the power line to avoid overloading and fire hazards.
The use of adaptors or extensions is generally not advisable; if it is
necessary to use them, they must comply with safety regulations and
the total current (amps) must not be rated lower than the maximum
current of the appliance.
• Before each use, check that the appliance is in good condition and that
the power cord is not damaged: if in doubt consult a qualified
professional.
• Ensure that the power cord is correctly positioned and does not come
into contact with hot parts or sharp edges, or become wound around
the appliance itself and is not twisted.
• Do not hang or even lean the appliance against any walls.
• Place the fan heater far from any other source of heat, from flammable
material (curtains, tapestries, etc.), from flammable gases or explosive
objects (spray cans) and from materials that can be deformed by heat.
Make sure there is 120 cm of free space in front of the fan heater and
50cm free space on both sides and behind it.
• The surface where the appliance is used must be stable, spacious (do
not use on shelves or steps), level (since the appliance could tip over)
and heat resistant.
USING THE APPLIANCE
First use
Warning: run the appliance to eliminate the "new smell" and any oil
residue from the manufacturing process for at least 10/15 minutes.
During this operation, ventilate the room well to eliminate the "new
smell" that is given off by the appliance.
To use the fan heater, please follow the instructions below:
1)
Insert the plug in the current socket.
2)
To switch the appliance on, turn the selector knob to the position
corresponding to the desired function:
"0"= OFF; "
"= fan; "•"= air warm (1000W); "• •"= air very hot
(2000W) + adjustable thermostat.
The thermostat controls the operation of the appliance according to the
surrounding room temperature: it continuously warms up to the set
temperature, and then heats it only when the temperature decreases
and for the time it takes to return it to the set value. It is actuated with
its knob: if it rotates counterclockwise the fan heater will be off, if fully
16
Publicité
