Grundig Multi-Cyclonic VCC 7570 C Mode D'emploi page 18

PREPARATION ____________________________
Notes
Check whether the mains voltage given on the
█
rating plate (on the underside of the appliance)
matches the local mains voltage.
Always unplug the appliance from the wall
█
socket before assembling or removing the
accessories.
1 Insert the flexible hose adapter
on the main body of the vacuum cleaner until it
clicks into the locked position. Make sure that
the projecting parts on the flexible hose
aligned.
Note
To remove the flexible hose
█
on the connector and pull out the hose.
2 Insert the end of the handle into the telescopic
tube .
K
18 ENGLISH
into the inlet
E
are
A
, push the knobs
A
Note
To remove the telescopic tube
█
the handle.
Note
To adjust the length of the telescopic tube
█
push and hold the height setting switch
slide the tube out or in as required. Release the
height setting switch
tube clicks into place.
3 Insert the multi-floor brush
the lower end of the telescopic tube
Notes
The multi-floor brush
█
directly on the flexible hose for more flexibility.
To remove the multi-floor brush pull it off.
█
, pull it off of
K
and
J
and make sure that the
J
or accessory into
I
.
K
can also be attached
I
,
K