Publicité
Les langues disponibles
Les langues disponibles
Installation
9) Use a Spirit Level Ruler to measure whether the hood is in a
horizontal level, and use two 4*30mm Screws to lock into the safety
hole position of the hood (not mandatory, according to user's wishes
to choose whether to lock).
EN
10) Tear off the tape from the air outlet.
NOTE:
Make sure you remove the tape on the damper and check if the
damper opens and closes freely, otherwise it make noises, and the
cooker hood will be shaking.
4*30mm Screws
COMPONENTS:
Part 2: 4*30mm Screws X 2
Spirit Level Ruler
Tape
12
Publicité
