HQ Power MICW40 Notice D'emploi page 7

10. Important Remarks
• Keep the receiver 1m above the ground and 1m away from walls for the best results.
• Turn off your device before changing the batteries.
• Never open the receiver's housing.
• Make sure to match the frequency or the channel on your receiver and your microphone / transmitter.
• Use only fresh alkaline batteries as partially drained batteries may cause weak signal reception.
11. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
12. Technical Specifications
Receiver
RF Frequency Range
Modulation Mode
RF Output Power
Peak Deviation
Frequency Response
Reception Range
Operating Temperature
Microphone
Power Supply
Power Switch
Dimensions
Receiver
Microphone
Weight
Receiver
Microphone
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
MICW40
863MHz ~ 865MHz
FM (PLL)
8 ~ 30mW
+/- 45KHz
80Hz ~ 15KHz (+3dB)
100m (open environment)
-10°C ~ +50°C
2 x 1.5V AA batteries (order code LR6C, incl.)
with squelch circuitry
220 x 180 x 42mm
Ø 50 x 275mm
1.5kg
225g
7 HQPOWER