Far Tools GGC 3300 Notice Originale page 32

CLEANING THE GENERATOR SET
CLEAN THE GENERATOR SET EVERY 100 HOURS OF OPERATION OR EACH YEAR,
WHICHEVER IS FIRST .
-
Remove all dust and debris around the exhaust silencer
-
Clean the entire generator using a cloth and a brush (it is not recommended to wash with
.
a water jet) (Clean the motor and AC generator inlets and outlets carefully.)
-
Check the general condition of the generator and replace defective parts if required
Operations to be carried out
Oil level check
Motor oil drainage
Air filter maintenance
Clean/replace spark plug
Cleaning of generator set.
Descale and check the play on the relief valves *
*
This operation must be performed by an experienced technician (contact your regional agent). For details on operations,
refer to the relevant sections
118025-4-Manual-F.indd 32
GENERAL MAINTENANCE CHART
Intervals, frequency
.
© FAR GROUP EUROPE
.
5 25/50
hours hours
x
x x
EN
.
100
hours
x
x
x
x
12/05/14 14:56:55