Filling The Fuel Tank - Far Tools GGC 3300 Notice Originale

ASSEMBLY AND INSTRUCTIONS FOR USE
PREPARATION FOR COMMISSIONING (BEFORE START-UP)
1. CHECKING OIL LEVEL AND TOPPING UP OIL
The oil should be checked and topped up with the generator placed on a horizontal sur-
face.
-Remove the dipstick cap (2) by unscrewing it.
-Inspect the level and top up if required (if it is not necessary to top up, refasten the dips-
tick cap: the operation is then complete).
-Fill the oil casing using a funnel until it overflows.
-Refasten the cap firmly in the filling tube.
-Wipe the excess oil with a clean cloth.

2.FILLING THE FUEL TANK

-Unfasten the cap on the fuel tank (2).
-Fill the tank (1) using a funnel, taking care not to spill any petrol.
-Refasten the cap onto the fuel tank
DO NOT FILL the fuel tank to overflowing level. Leave a gap of approxima-
tely 5 mm at the top of the tank to allow the fuel fumes to expand.
AVOID STARTING THE MOTOR OR FILLING WITH FUEL when the spark
plug cover has been removed.
Check the motor oil level before each start-up.
118025-4-Manual-F.indd 26
© FAR GROUP EUROPE
EN
12/05/14 14:56:54