Installation Rules - La Cimbali M29 Select Utilisation Et Installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
authorized technicians.
Carefully read the warnings and rules in this manual because they provide important
information regarding safe installation, use and maintenance of the machine.
Keep this booklet handy for easy reference.
Staff responsible for moving the machine must realize the risks in moving heavy loads.
Move the machine carefully, using the correct lifting equipment (fork lift, for example).
If moving the machine by hand, make sure:
handling;
- to always use the necessary safety gear (shoes/gloves).
After removing the machine from its packing materials, make sure that the machine and its safety
devices are intact.
Packing materials (plastic bags, polystyrene foam, staples, etc.) must be kept out of the reach of
children because they are potentially hazardous. They must not be released into the environment,
but sent to special waste-disposal centres.
Before plugging in the machine, make sure that the information on the nameplate (voltage, etc.)
matches that of the electrical and water systems.
Check the condition of the power supply cord; if it is damaged it must be replaced.
Completely unwind the power supply cable.
counter. Keep in mind that the highest surface on the machine (the cup warmer tray) sits at a
height of at least 1.2 meters. Make sure there is a shelf nearby for accessories.
An electrical outlet, water connections, and a drain with siphon must be in the immediate vicinity.
Do not install in rooms (kitchens) that are cleaned with jets of water.
Do not obstruct openings or ventilation and heat vents.
Do not install the machine outdoors.

2. Installation Rules

WARNING
3 EN

Publicité

Table des Matières
loading

Table des Matières