Samsung LN-S5296D Mode D'emploi page 52

Selecting a Signal Source (Air or Cable) for PIP
If the PIP source is TV while PIP is On, you can select a different broadcasting source for the PIP picture from the main picture.
Changing the Channel of the Sub (PIP) Picture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
Alternate method
Press the CH or CH
the sub picture channels while PIP is on.
1
Press the
then press the ENTER button.
2
Press the
ENTER button.
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
3
Press the
ENTER button.
Select "Return" by pressing the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
1
Press the
then press the ENTER button.
2
Press the
ENTER button.
3
Press the
ENTER button.
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
Select "Return" by pressing the
button to return to the previous menu.
Press the EXIT button to exit.
button under the cover of the remote control to change
MENU button. Press the
or button to select "Air/Cable", then press the
or button to select "Air" or "Cable", then press the
MENU button. Press the
or button to select "Channel", then press the
or button to select a channel you want, then press the
English-50
or button to select "PIP",
or button, then press the
or button to select "PIP",
or button, then press the ENTER