Samsung LN-S5296D Mode D'emploi page 16

Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
TV Rear Panel
Incoming Cable
or Antenna
Connecting a PC
PC Audio Cable (Not supplied)
2
1
D-Sub Cable (Not supplied)
Each PC has a different back panel configuration.
The HDMI/DVI jacks do not support PC connection.
We recommend the use of cables with a Ferrite Core.
Internal Mute Off Speaker Output
Internal Mute On Mute
Video No Signal Mute
When "Internal mute" is set to "On", Sound menus except "Multi-Track Options" cannot be adjusted.
See selecting the Internal Mute on page 58.
Please insert the
card as shown.
PC
Internal Speakers
RF AV, S-Video
Speaker Output
Mute
Mute
1. Insert the CableCARD into the "CableCARD" slot and
the message "CableCARD
the screen. If the channel information does not
already exist, the message "Updating Channel List"
is displayed during channel information configuration.
2. When channel information configuration is finished,
the message "Updating is Completed" is displayed.
It indicates that the channel list is now updated.
TV Rear Panel
Component, PC, HDMI
Speaker Output Sound Output
Mute Sound Output
Mute Mute
English-14
TM Inserted" is displayed on
1. Connect a D-Sub Cable
between PC IN [PC]
connector on the TV and
the PC output connector
on your computer.
2. Connect a PC Audio Cable
between PC IN [AUDIO]
jack on the TV and the
Audio Out jack of the sound
card on your computer.
Audio Out (Optical, L/R Out)
RF AV, S-Video
Sound Output
Sound Output
Mute
Component, PC, HDMI
Sound Output
Sound Output
Mute