Memorizing Channels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels.
After the available channels are memorized, use the CH
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (channel manager).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected
to the TV (i.e., an antenna or cable system).
and CH
1
Press the
MENU button. Press the
then press the ENTER button.
2
Press the
or
Press the
or
button.
3
Press the
or
button.
English-20
buttons to scan through the channels.
or
button to select "Antenna", then press the
button to select "Air" or "Cable", then press the ENTER
button to select "Auto Program", then press the
button to select "Channel",
ENTER button.
ENTER
continued...