Example For Setting The Timer - Saunier Duval SDH 10-020 MCNHWI Notice D'utilisation

7- INDICATORS ON THE DISPLAY OF REMOTE CONTROL

7.6- EXAMPLE FOR SETTING THE TIMER

NOTE
After pressing one of the TEMP/TIME buttons
it is necessary to continue pressing the button(s) until the desired time has been reached. Otherwise
previous steps for setting the timer need repeating.
To start the air conditioner operation at 6:00 a.m.
1. Press the TIMER button. The TIMER ON indicator and the time setting are displayed and they start
flashing. If the start time setting is 6:00, the TIMER ON function is activated automatically after 
seconds.
. Use the TEMP/TIME button(s) at the remote control to adjust the time setting for TIMER ON on the
display to 6:00.
. 0.5 second after releasing the TEMP/TIME button the TIMER ON indicator stops flashing and this timer
function is activated.
5 6
▴▴
TIMER ON
Use this feature if you want to start the air conditioner
operation automatically at a fixed time, for example,
before you come home again.
5 6
, the time is registered within 0.5 second. Therefore
TIMER OFF
Use this feature if you want to stop the air conditioner
automatically at a fixed time, for example, after you went
to sleep.
To stop the air conditioner operation at :00 p.m.
1. Press the TIMER button. The TIMER OFF indicator and
the time setting are displayed and they start flashing. If
the time setting is :00, the TIMER OFF function is
activated automatically after  seconds.
. Use the TEMP/TIME button(s) at the remote control to
adjust the time setting for TIMER OFF on the display to
:00.
. 0.5 second after releasing the TEMP/TIME button the
TIMER OFF indicator stops flashing and this timer
function is activated.
14 14