Publicité
Les langues disponibles
Les langues disponibles
CH
/
Press and release CH
automatically stops at the next channel set into
memory. For proper operation, before selecting
channels, they should be set into the memory. See
"Memorizing channels" on page 18.
DISPLAY
Press DISPLAY to display the current information on
the screen.
When the TV receives a digital signal, the digital
information will appear.
62-1 HDTV_Moving_Picture...
CH-1
Digital
Air
No Program Information is available
USB Memory Information
Play Time
: --:--:--
Message : Now Live View
USB Memory is unplugged
Full
1080i
•
Channel number
•
Channel label (if preset)
•
Sleep timer
•
Program guide
•
Resolution
•
Station name
When the TV receives an analog signal, the analog
information will appear.
14
Analog
Cable
Mono
Full
480i
•
Channel number
•
Sleep timer
•
Audio information
(Stereo, SAP or Mono)
•
Channel label (if preset)
Press DISPLAY again to clear the call display.
NOTE:
•
After a few seconds, DISPLAY screen will return to
normal TV operation automatically.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP
button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep
time is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to Off.
EN 16
/
. The channel
Sleep Timer
Off
English
•
Broadcast program name
•
Signal type
•
Audio language
•
Picture size
•
Time Shift display
Sleep Timer
Off
•
Signal type
•
Picture size
•
Resolution
Quick guide for menu
operation
Call menu and for example: Select Language.
1
Press INPUT SELECT to select TV mode.
2
Press MENU. The TV menu screen will appear.
Main Menu
>>
Picture
Audio
Channel
CH
Setup
3
:Select
ENTER :Set
Press ▲ or ▼ to select "Setup", then press ▶ or
ENTER.
4
Press ▲ or ▼ to select "Language", then press ◀
or ▶ to select the desired language.
...on the following pages the menu can be called
in the same way as here.
5
Press EXIT to return to the normal screen.
NOTE:
•
If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
Publicité
