Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1
2
3
4
3
before the first use
After installation, leave the appliance for at least 3 hours before inserting the plug into the socket. The cooling circuit must
be stabilised, before the appliance is able to work efficiently.
Observe these instructions when using the appliance for the first time: carefully unpack the freezer and remove all
packaging material. Keep the packaging (plastic, polystyrene and cardboard) out of the reach of children. After unpacking
the machine, check it for external damage that may have occurred during transport. Place the appliance on a sturdy, flat
surface. Clean the appliance before using it for the first time; particularly the interior (see Cleaning & Maintenance).
The installation and electrical connection must be performed by a qualified technician, in accordance with the installation
instructions and local regulations.
How the appliance should be placed is described in the Installation Instruction.
The appliance must be connected to a properly installed earthed socket. The voltage (AC) should correspond with the
voltage stated on the information plate. The information plate is located on the left side wall in the appliance.
The appliance may emit a strange smell when switching it on for the first time. This will disappear once the appliance starts
to cool.
1.
Operating panel
2.
Freezer compartment with cover
3.
Freezer compartment
4.
Freezer drawers
5.
No Frost circulation system
6.
Interior lighting
7.
Ice cube holder
7
5
6
English
15
•
Publicité
