Publicité
Les langues disponibles
Les langues disponibles
see smoke, or if it has fallen or shows any other signs of damage. Remove the plug
from the socket immediately. Take the entire device back to your supplier or a
recognised electrician to be checked and/or repaired. Always ask for original parts to
be used.
4.
The device may only be opened and/or repaired by a competent and qualified
person. Do not carry our your own repairs as this could be dangerous! Repairs carried
out by unauthorised persons or changes made to the device could damage the
dust/waterproof capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5.
If the electrical cable is damaged, it must be replaced by the manufacturer, their
service department or somebody with similar qualifications in order to prevent
creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They
will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be
liable for the consequences.
Description
1. Handle
2. Control panel with mode selector dial and thermostat
dial
3. Air outlet
4. Adjustment knobs
5. Frame
By loosening the adjustment knobs (4), the heater can be
tilted in its frame so that the blow direction can be
adjusted. Do not point it downwards onto flammable or
heat sensitive floors! For safety reasons, the tilt is limited. Re-tighten the knobs before using
the heater again!
Control panel
The control panel consists of two
dials:
•
The mode selector dial with 3
positions is located on the left:
-
O or off
- fan and 1000W power
- fan and 200W power
•
The continuously adjustable
thermostat dial is located on
the right.
25
Publicité
