Service Time Menu; Date And Time - La Cimbali M39 GT R2 Utilisation Et Installation

Pressing the key (29), the following message will appear
on the display:
SERVICE TIME

DATE AND TIME

ON time
OFF time
Day off
Energy Saving
- ON time (time the machine switches on);
- OFF time (time the machine switches off);
- day off (day on which the enterprise is closed);
- Energy Saving (enable/disable the Energy Saving
function: YES/NO);
- Night ON (start time for evening beverage price: only
when payment system is connected);
- Night OFF (end time for evening beverage price: only
when payment system is connected);
- Wash ( he time that washing must take place);
t
- Replacement water replacement can be set by time
(activated by technician);
General indications
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
ON time 22:00
OFF time 22:00)
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
To modify the date and hour, press the
the corresponding line. The following message will appear:
DATE AND TIME
Year
Month
Date
Hour
Minutes

Service time menu

+
03:00
03:00
none
YES
Date and time
key (29) on
+
15
09 SEP
21 WED
17
12
19 EN
- Press the key (29);
- Change the time, using the
- Press the (24)
Repeat the steps previously indicated to modify the washing
times.
NOTES
Wash: wash cannot be disabled. It is requested daily at the
programmed hour, and always within 24 hours.
Set OFF against the time so as to not activate these wash
cycles.
OFF is displayed press the
is "00:00".
For more details, please consult the technical manual at the
NOTES
The "WATER CHANGE" function with time request is set
by the technical personnel who can also enable or disable
the "block" function.
With "block" enabled, if the water change is not done
within an hour, the machine prevents beverages from
being dispensed.
With request scheduled the user can only change the time
the request appears.
Use the (30) and (31) keys to move the cursor (black
The cursor will turn into an arrow è and it becomes possible
to change the number for the selected entry by using the
(30) and (31) keys.
Once the operation is completed, press the
Note: the cursor changes back to black line.
Repeat the operation described above to modify
other parameters.
(30) and (31) keys;
.
(31) key the indicated time
key (29).
key (24)to