Publicité
Les langues disponibles
Les langues disponibles
Cleaning and Replacing the Filter
Clean the filter regularly Otherwise, the air intake
efficiency may deteriorate, and malfunction may occur.
CAUTION
Make sure that you pull out the power plug from the
0
outlet before cleaning or replacing the filter.
Before turning this unit upside down and placing it on
0
the floor or a table, make sure that you lay a soft rag
in advance to prevent the projector from being
scratched.
Remove the inner filter
1
.
Clean the filter
2
.
Wash the filter with water and dry it in a shaded
0
area.
If the filter is extremely dirty, clean it with a
0
neutral detergent. Put on rubber gloves when
using a neutral detergent.
After washing the filter with water, make sure
0
that it is completely dry before reinstalling.
Otherwise, electric shock or malfunction may
occur.
Do not clean the filter with a vacuum cleaner or
0
air duster. The filter is soft and may be easily
damaged.
68
Pull out while
pushing down the
tab
Reinstall the inner filter
3
.
If the filter is damaged or too dirty to be
cleaned
Replace with a new filter. A dirty filter will dirty the
0
internal parts of the unit and cause shadows to appear
on the video image.
To purchase a new filter or when there is dirt in the
0
internal parts of the unit, consult your authorized
dealer or nearby service center.
Inner filter (exchangeable filter)
0
Product no.: PC010661199
Check that the left
and right tabs are
locked onto the unit
Publicité
