JVC DLA-X95R Manuel D'instructions page 26

Viewing Videos
LAMP
STANDBY/ON
3
26
MEMO
WARNING
When you are using B A, be sure to remove the lens cover.
0
Connect the power cord, and ensure that the "STANDBY/ON" indicator
0
lights up in red.
Turn on the power
1
Remote control: press the C [ON] button
Projector unit: press the A [STANDBY/ON] button
The "STANDBY/ON" indicator light switches from red to green (light
0
goes off after the unit starts up).
1
(D C) The motorized lens cover opens.
0
"STANDBY/ON" lights up (red)
2
In standby state
STANDBY/ON TANDBY ND
.
Choose the image to project
2
Remote control: press the [INPUT] button ([HDMI 1], [HDMI 2],
[COMP.], [PC] (D C only))
Projector unit: press the [INPUT] button (pressing the button each time
switches the mode)
.
Play back the selected device to project the image.
0
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control
The "STANDBY/ON" indicator light starts to blink in green.
0
Press the [HIDE] button again to resume display of the image.
0
The power cannot be turned off when the image is temporarily
0
hidden.
"STANDBY/ON" lights up (green)
LAMP WARNING
HDMI 1
HDMI 2 COMP.
During lamp startup
STANDBY/ON TANDBY ND LAMP WARNING
PC ( )