Publicité
Les langues disponibles
Les langues disponibles
PC D C
Setting is enabled when the PC input terminal is selected.
Setting
Auto Alignment
Tracking
Phase
Picture Position Horizontal
Vertical
Picture Position (Horiz./Vert.)
Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical
synchronization signals.
* Adjustment cannot be made during 3D signal input.
Aspect (Video) / Aspect (PC)
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
Æ "Adjusting the Screen Size (Aspect)" （p. 33）
Mask
For hiding the peripheral area of the image with a mask (black strip).
Off
On
Mask: black strip around the periphery
Progressive
For converting the interpolation setting of the interlaced signals.
Setting
Auto
Off
3D Setting
For setting 3D movies for viewing.
Æ "Viewing 3D Movies" （p. 34）
54
Adjusts "Tracking", "Phase", and "Picture Position" automatically.
Adjusts the horizontal size and display position of the video image.
Adjusts flicker and blur in the video image.
Adjusts the horizontal position of the video image.
Adjusts the vertical position of the video image.
Setting
Off
Not masked.
2.5%
Masks about 2.5% of the peripheral area of the image.
5%
Masks about 5.0% of the peripheral area of the image.
Custom
Masks about 0% to 5% of the four sides of the image.
Performs interpolation by automatically detecting whether the interlaced signals
are converted from 24p video images, such as those in film movies, or interlaced
signals of video materials.
Interpolates video images as interlaced signals of video materials, etc.
Description
Description
Description
Publicité
