Publicité
Les langues disponibles
Les langues disponibles
Operators and others in work area must wear hearing
protection.
WARNING:
• Read all manuals included with this product carefully. Be
thoroughly familiar with the controls and the proper use of
the equipment.
• Any blast product will produce a powerful flow of abrasive
particles. To avoid personal injury and property damage,
study this manual thoroughly before assembling, operating
or servicing this abrasive blast vacuum. Never point abrasive
blaster nozzle at anyone. Do not use with lid open.
• Do not exceed any pressure rating of any component in
the system.
• Do not use damaged or worn attachments.
• During operation, do not expose hands or skin directly in
the line of the blast nozzle.
• Keep all nuts, bolts and screws tight and ensure
equipment is in safe working condition.
• Disconnect the abrasive blast vacuum from the air supply
before changing accessories or attempting to install,
service, relocate or perform any maintenance.
• Check hose and air lines for weak or worn condition and
make sure all connections are secure before each use.
• Use in a well ventilated area to prevent exposure to blast
media and air born particles.
• Do not expose blast vacuum to moisture. Do not use in
damp or wet locations. Keep out of rain.
• Ground all machines. If the machine is equipped with
a three-pin plug, it should be plugged into a three-pin
electrical socket. Never remove the ground pin.
• Do not abuse the power cord. Never use the power cord
to carry tools or pull the plug from the outlet. Keep power
cord away from heat, sharp edges, moving parts and
blast stream. Replace damaged power cords immediately.
Damaged power cords increase the risk of electrical shock.
• Use clamps or other practical means to secure and support
the work piece to a stable platform. Holding the work by
hand or against your body may lead to loss of control.
• Keep children away. All children should be kept away from
the work area. Never let a child handle a tool without strict
adult supervision.
Grounding Instructions
In the event of malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of
electric shock. The vacuum must be connected to a cord having
an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
DANGER: Improper connection of the equipment grounding
conductor can result in a risk of electric shock. The conductor
with insulation having an outer surface that is green with or
without yellow stripes is the equipment grounding conductor.
4
Publicité
