Publicité
Les langues disponibles
Les langues disponibles
Maintenance and care
7.4
Safety procedures
•
It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (→ DGUV norm 100-500).
•
The corresponding legal regulations and the regulations of the declaration of conformity must be
observed!
•
The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at:
service@probst-handling.de
•
We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert inspection" in a clearly
visible place (order no.: 2904.0056+Tüv sticker with year number) after the inspection has been done.
The check by an expert must be proved!
Device
Year
7.5
Hints to the type plate
•
Type, serial-number and production year are very important for the identification of your device. If you
need information to spare-parts, warranty or other specific details please refer to this information´s.
•
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled
with the device. Do not exceed this carrying capacity/working load limit (WLL).
•
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
7.6
Hints to the renting/leasing of PROBST devices
With every renting/leasing of PROBST devices the original operating instructions must be included
unconditionally (in deviation of the user´s country's language, the respective translations of the original
operating instructions must be delivered additionally)!
53100344
Date
19 / 20
Expert
Company
GB
Publicité
