probst FTZ-MAXI-25 Instructions D'emploi page 36

General
3 General
3.1 Authorized use
The device FTZ-MAXI is universally applicable for gripping and moving of clean and on the gripping surfaces unpolluted
concrete precast parts; steps; kerbstones (also natural kerbstones), as well as of Kassler Bord (bus and railway profile
stone) and the like.
In conjunction with a hoist/carrier such as an excavator or crane.
This device is equipped as standard with the
following elements:
ATTENTION: The use of this device is only permitted in proximity to the ground (→ chapter "Safety at
work").
Only stone elements with parallel and plane surface are allowed to be picked-up and handled.
Because the gripping good could fall down.
53100344
•
Universally adjustable gripping range
•
Hooking bolts for slings (crane hook, slippage etc.) on
carrier/hoist.
•
Automatic release for fully automatic changeover from "full" to
"empty".
•
Exchangeable gripping elements (rubber-metal rails)
8 / 20 GB