Alpine IVA-M700R Mode D'emploi page 104

1
2
104
Navigation System
Operation (Optional)
Controlling Navigation
System
If an optional Alpine Navigation System is
connected to the IVA-M700R/CVA-1005R, some
of its functions can be controlled from the IVA-
1 2
M700R/CVA-1005R.
The functions and display indicators available
will vary depending upon the Navigation
System connected. For details, consult your
Alpine dealer.
Press the SOURCE button. The main menu
screen appears on the display.
Rotate the rotary encoder and select "NAVI,"
then press the rotary encoder to execute the
selection.
The Function Guide display changes to show
the same button names as those for the remote
control supplied with your navigation system.
Notes: • When the V. SEL button is pressed
while the NAVI selection mode is
being selected in the VISUAL setting
(refer to page 190), the navigation
mode will be directly activated.
• If the NAVI mode menu is not
displayed on the main menu screen,
select "AUX IN" in the Initialization
mode screen and set the NAVI mode
to the ON position.
• If you use the buttons displayed, you
can control the navigation system from
IVA-M700R/CVA-1005R in the similar
way to the remote control operation.
For operation, refer to the Owner's
Manual for your navigation system.
• Depending on the navigation system
connected to this unit, some
functions and displays may vary.
English