11. Radio
You can receive both analogue FM radio and digital DAB radio with this device.
Press the
button once or several times until FM MODE or DAB MODE is
shown on the display.
If necessary, adjust the wire aerial for optimal FM reception.
11.1. Storing stations automatically
Press the SCAN button to start a station search. All the stations found by the search
are now stored automatically, one after the other. The previous station slots are
overwritten.
This function must be performed in DAB mode before the device is used
for the first time in order to create a station list including all stations that
can be received. The stations must then be stored manually for the sta-
tion buttons.
11.2. Tuning the stations
11.2.1. In FM mode
Press the TUN/ buttons on the remote control or TUN-/+ on the device to
set a frequency manually.
11.2.2. In DAB mode
Press the TUN/ buttons on the remote control or TUN-/+ on the device
once or several times to run through the station list.
Press ENTER to play the selected station.
11.3. Station search (FM mode only)
Press and hold the TUN/ buttons on the remote control or TUN-/+ on the
device to perform an automatic station search forwards/backwards.
11.4. Storing a radio station
11.4.1. Storing stations manually
The radio has 30 memory slots in both DAB and FM mode respectively where you
can save your favourite stations.
First, set a station as described above.
Press and hold the MEMORY button until PRESET STORE is shown on the dis-
play.
Press the or button and select the desired programme position.
Press the ENTER button again to complete the process.
66