Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE UNIT
Listening to music
VOL –
button
Check the following before
operating the unit.
– The BLUETOOTH device is
turned on.
– Pairing of this unit and the
BLUETOOTH device is complete.
– The BLUETOOTH device
supports the transmitting music
function (profile: A2DP).
1
Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice and the unit is turned on.
Note
Do not press and hold the POWER
button for more than 7 seconds,
otherwise pairing mode is entered.
2
Make the BLUETOOTH
connection (A2DP) from
a BLUETOOTH device to
this unit.
Refer to the operating
instructions supplied with the
BLUETOOTH device on how
to operate it.
POWER button
VOL + button
3
Start playback on the
BLUETOOTH device.
Notes
• When you play music by connecting the
unit to a BLUETOOTH device using
HSP (Headset Profile)*, sound quality
will not be high. For better sound,
change the BLUETOOTH connection
to A2DP (Advanced Audio Distribution
Profile)* by operating the
BLUETOOTH device.
• This unit cannot control music playback
functions of the connected device.
* For detail on profiles, see page 22.
To adjust the volume
Press the VOL + or – button while
listening to the music.
Tips
• When the volume level is low, raise the
volume of the connected device. The
sound will be clearer.
• Volume level for listening to music and
calling can be set independently.
Note
You cannot adjust the volume of the
BLUETOOTH device by the unit VOL
buttons.
Continued
13
US
Publicité
