Publicité
Les langues disponibles
Les langues disponibles
Congratulations on your purchase of the model
cutter "Antje". This model is mainly intended for
beginners, but is also a lot of fun for the experi-
enced ship model builder during construction and
operation.
To build the model you need some glue, putties
and paints. You will find recommendations for
these together with our tool recommendations on
the supplementary sheet in the construction kit.
PVC adhesive tape or paper adhesive tape is also
required for masking when varnishing. In the Krick
assortment you will find the suitable adhesive tape
Stand Mai 2019
M
T
.com
Building Instructions
Fishing Cutter Antje
Order-No. ro1110
Seite 1
e.g. order number 493269. This adhesive tape is
available in different widths. Do not use crepe
tape!
The construction of the model is eased by the nu-
merous photos of the construction phases.
Before starting construction, you should clearly
identify these parts using the parts list, construc-
tion manual and construction plan. During the
construction process, only the parts you need
should be removed carefully and with the help of a
sharp knife.
©
Krick Modelltechnik Knittlingen
Publicité
