Peavey PV 35XO Mode D'emploi page 12

R E A R P A N E L
7 6 5
9 8 4 3
2 1
INPUT (Channel 1) (1)
This XLR female 3-pin connector provides a balanced input for channel 1.
LOW OUTPUT (Channel 1) (2)
This XLR male 3-pin connector provides a balanced output for the low frequencies for channel 1.
MID OUTPUT (Channel 1) (3)
This XLR male 3-pin connector provides a balanced output for the mid frequencies for channel 1.
HIGH OUTPUT (Channel 1) (4)
This XLR male 3-pin connector provides a balanced output for the high frequencies for channel 1.
INPUT (Channel 2) (5)
This XLR female 3-pin connector provides a balanced input for channel 2.
LOW OUTPUT (Channel 2) (6)
This XLR male 3-pin connector provides a balanced output for the low frequencies for channel 2.
MID OUTPUT (Channel 2) (7)
This XLR male 3-pin connector provides a balanced output for the mid frequencies for channel 2.
HIGH OUTPUT (Channel 2) (8)
This XLR male 3-pin connector provides a balanced output for the high frequencies for channel 2.
IEC MAINS CONNECTOR (9)
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the
intended operating voltage is included in the carton.
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does
not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded
properly. To prevent the risk of shock or fire hazard, always make sure that the equalizer and all associated
equipment is properly grounded.
Incorporated into this IEC MAINS CONNECTOR is the MAINS FUSE HOLDER. If for any reason you are
unable to power up this unit, remove the fuse by pulling out the holder. Check to see if the fuse is operational.
If not, then replace with a fuse of the appropriate value and rating. If the fuse continues to fail contact your
nearest Certified Peavey Service Center.