Aqua Medic Qube 50 plant Mode D'emploi page 9

4. Safety advices
The Qube has to be mounted only openly above the aquarium. It must not be mounted under a
•
cover since there, it might overheat and get possibly damaged by condensation at night. The
light is not waterproof.
The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning and operating, take care that no humidity passes the ventilation slits and enters
•
the interior of the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the light yourself. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
5. Installation
The light is either mounted to a vertical glass pane with the included goose neck or
with the steel wire suspension (included in shipment).
5.1. Mounting the ceiling suspension:
The wire suspension system Qube fit provides a neat and simple method of ceiling mounting of the
Qube.
The suspension system consists of the following (1 pc. each):
1. Ceiling suspension incl. screws and plugs, app. 115 cm of stainless steel incl. stopper
2. Lamp fixing
First of all, the ceiling suspension (Fig. 2, No. 2) has to be mounted to the ceiling securely by using
screws and plugs.
Fig. 1: Qube 50 incl. connections and controllers
1. Controller for channel B
2. Controller for channel W
3. 0 - 10 V connection of control cable (inlet)
4. 0 - 10 V connection of control cable (outlet)
5. 24 V connection for transformer
6. Thread for the holder
7. Fan's grid
on the ceiling
9