Aqua Medic Qube 50 plant Mode D'emploi page 10

Now, the stainless steel wire is fed through the nut of the ceiling suspension by pressing the
stopper down with a fingernail. The nut is screwed into the ceiling suspension and the wire comes
out of the lateral opening. When the wire has the requested length, any surplus wire may be cut off
with pliers. The black nut has to be screwed into the thread of the Qube (Fig. 1, No. 6) for fixing
the light. The steel wire can only be adjusted in length at the ceiling suspension. Attention: If the
stopper is pressed, the wire may slip out and the Qube falls into the aquarium. Therefore, hold the
light tight.
Pay attention to a sufficient distance to the water surface so no water or salt enters the
light!
Fig. 2: Steel wire suspension
1. Plug
2. Ceiling suspension
3. Screw
4. Nut for ceiling suspension
5. Steel wire
6. Nut for Qube fixing
Available spare parts: Please refer to www.aqua-medic.de.
5.2. Mounting the aquarium fixing
Fig. 3: Holder incl. goose neck
10