Aqua Medic Qube 50 plant Mode D'emploi page 11

The bracket is pushed onto a vertical aquarium pane and fixed with the two locking screws. The
goose neck is screwed into the thread of the bracket, the Qube is fixed at the other end. The cable
of the power supply can be fixed with cable ties on the goose neck.
5.3. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Fig. 4: Light colours and channels (Qube 50)
Fig. 4: Light colours and channels (Qube 50 plant)
Electric connection:
The Aqua Medic Qube 50 can be connected to any safety socket or a timer, if automatic
operation is required. In case of using a timer, both channels will be switched on and off at the
same time. A separate control of the white and blue channel is possible by using the controllers
(Fig. 1, No. 1 + 2).
Due to the 0 - 10 V connection it is possible to control the Qube externally by suitable units
regarding the light colour and brightness (Fig. 1, No. 3). More Qubes can be controlled by the 0 -
10 V outlet (Fig. 1, No. 4).
If the lights are connected in series, the first Qube is "Master", all subsequent work as "slaves".
11